In stages: make a wall of decorative stones

You want to create an impact in your living room by covering one of its walls with 3D triangles "> Essentials

  • SENS decorative stones
  • 3N1 cementitious cement from TEC
  • Portable grinding wheel
  • Bucket
  • 1/4 "x 1/4" Mason Trowel
  • Work gloves
  • Protective glasses
  • Tape measure and level
  • Drill and mixer for mortar


  1. Reproduce the chosen ground pattern to better visualize it before starting the wall installation. This preparation step will facilitate the installation step.

  2. Prepare the mortar as specified by the manufacturer. Start the installation starting from the bottom. Apply the mortar using the trowel, proceeding in small sections. Start by pasting the first half triangle and the first full triangle in the lower left corner.

  3. Continue laying the first row alternating the direction of the triangles. At the end of the row, measure the remaining space to calculate the cut to make. Cut the triangle using the portable grinder.

  4. Make sure throughout the installation that the installation is level. In order to maintain the level for the next rows, make sure that the triangles are always glued together.

  5. Continue laying the other rows by repeating the same operations. To bypass the openings (electrical outlets, windows, etc.), take the measurement of the triangles to be cut and cut them with the help of the portable grinder.


Leave Your Comment

Please enter your comment!
Please enter your name here